mirror of
https://github.com/magnus919/agent-skills.git
synced 2026-09-15 05:26:28 +03:00
Magnus HedemarkandGitHub
36638256a8
* feat: add portable ESP32 development skill Add source-backed workflows, safe templates, native CLI routing, and a read-only preflight for ESP32 hardware and firmware work.\n\nAI assistance: research, drafting, implementation, and review used OpenAI Codex and delegated DeepSeek agents under human direction. * docs: harden ESP32 family and security guidance Add source-backed family traps, brownout, calibration, USB recovery, and security-mode boundaries found during independent review.\n\nAI assistance: independent audits and drafting used delegated DeepSeek agents and OpenAI Codex under human direction.
1.6 KiB
1.6 KiB
Attached component contract
Identity and sources
- Manufacturer:
- Exact component / revision:
- Breakout or module / revision:
- Datasheet URL and revision:
- Module schematic URL and revision:
- Maintained framework driver and version:
- Access date:
Electrical contract
- Supply range:
- Logic levels / absolute maximum:
- Typical, peak, startup, stall, or inrush current:
- Required decoupling:
- Pull-ups / pull-downs / termination:
- Driver, level shifter, transceiver, flyback, isolation, or current limit:
- Safe state during ESP32 reset, bootloader, crash, and update:
Protocol contract
- Interface and mode:
- Pins / address / chip-select straps:
- Clock or baud range:
- Data order, word size, parity, or framing:
- Reset and startup timing:
- Identity / revision register or self-test:
- Readiness, interrupt, and clear sequence:
- Error, CRC, timeout, and retry behavior:
Measurement or actuation contract
- Range and units:
- Resolution, accuracy, repeatability, and drift:
- Transfer function:
- Calibration points / source:
- Warm-up / settling / conversion time:
- Mechanical, thermal, environmental, or duty-cycle limits:
- Actuator feedback, timeout, interlock, and fault behavior:
Bring-up evidence
- Supply measured at component
- Idle signal levels checked
- Bus scan / loopback / waveform checked
- Identity or self-test passed
- Raw data or unloaded output captured
- Conversion / calibration checked against reference
- Reset and power-cycle behavior checked
- Worst-case load / environment checked