mirror of
https://github.com/pbakaus/impeccable.git
synced 2026-09-21 18:47:02 +03:00
331540ddec18dae74e61c9fc4598e050f5624f71
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  Paul BakausandGitHub
|
331540ddec |
Scope a single rule to a file with ignore-value "*" --file (#379)
* Scope a single rule to a file with ignore-value "*" --file
`ignore-file <glob>` was the only file-scoped escape the hook offered, and
it is far blunter than most findings justify: it silences every rule for
that path forever, including rules not written yet. A real UI surface with
one noisy rule had no proportionate option.
Add a file scope to `ignore-value`, so one rule can be turned off in
matching files while staying active everywhere else:
hooks ignore-value design-system-font-size "*" --file "src/widget.js"
- Refuse a bare `"*"` with no `--file`. Suppressing a rule project-wide is
`ignore-rule`'s job, and the error says so.
- Reject unknown `--flags` instead of folding them into the value.
`ignore-value overused-font Inter --shard` stored the value
"inter --shard", matched no finding, and reported success.
- Key dedup on the file scope too. The same rule/value legitimately
appears more than once with different scopes; the old rule+value key
silently overwrote the earlier entry.
- Keep normalizer key order (rule, value, files, createdAt, reason) in
step across both copies. Normalizing runs on every write, so emitting a
different order than what is on disk rewrites untouched entries.
- Lead with the narrow form in the hook's directive footer and hooks.md;
`ignore-file` is now documented as the whole-file-out-of-scope case.
Dogfoods it on skill/scripts/live-browser.js, where all 32 findings are
design-system-font-size: the overlay is injected over arbitrary host pages
and builds a self-contained UI, so DESIGN.md's ramp does not describe it.
The other rules stay live for that file.
Assisted-by: Claude Code
* Show the file scope in hooks status, and stop the wildcard error misdirecting
Two findings from Cursor.
status formatted every ignore value as rule=value and dropped files. Now
that the primary hooks path writes file-scoped `"*"` entries, that rendered
`design-system-font-size=*` — which reads as exactly the project-wide
wildcard this command refuses, the opposite of what is on disk. Print the
scope, matching the `rule=value [files]` shape `impeccable ignores list`
already uses. This repo's own config already carries several scoped
wildcards written through the CLI path, so status has been under-reporting
them.
The bare-wildcard refusal always pointed at `ignore-rule <rule>`. For
overused-font that command refuses on its own without --all-values, so the
guidance handed the user a second error. Name the flag for that rule.
Assisted-by: Claude Code
* Refuse an empty --file glob, and store multi-file scopes in canonical order
Two Copilot findings, both the silent-no-op class this PR exists to remove.
An empty glob was dropped by filter(Boolean). So
`ignore-value overused-font Inter --file=` reported "Added
overused-font=inter" and wrote an entry with no files: the user asked to
scope a rule to one file and silently got the project-wide suppression
instead — broader than what they asked for, reported as success. Refuse an
empty or whitespace glob on every form (--file, --file=, --files, --files=)
in both the hook-admin and CLI paths.
Multi-file scopes were deduped but not ordered, and the dedup key compares
the files array, so `--file b.css --file a.css` stored a second entry
distinct from `--file a.css --file b.css`. Sort at parse so storage is
canonical, and sort inside the key so entries already on disk in another
order still compare equal.
Assisted-by: Claude Code
* Sort files in every dedup key, not just two of the four
My previous commit sorted the file scope at parse time and inside
ignoreValueFilesKey, and stopped there. Cursor pointed out ignoreValueKey
(CLI) and ignoreValueEntryKey (hook-admin) still joined `files` in stored
order, so add/remove dedup missed any on-disk scope whose glob order
differed from the sorted argv form: a re-add duplicated the entry and a
remove silently failed.
Four functions hash `files`; I had fixed two. All four sort now. The
remaining `files.join(', ')` call sites are display, not keys.
Verified against a config seeded in non-sorted order, as an older client
would have written it: the re-add updates the existing entry rather than
duplicating it, and remove-value finds it. Test covers that shape.
Assisted-by: Claude Code
* Refuse a following flag as a --file glob
Cursor again, same class as the last two. requireGlob checked non-empty but
not whether the argv it consumed was itself a flag, so
`ignore-value design-system-font-size "*" --file --reason "why"` took
`--reason` as the scope, left "why" to fold into the value, stored
value="* why" files=["--reason"], and reported success. Garbage, announced
as done.
Refuse a glob starting with `--`, in both the hook-admin and CLI paths.
Assisted-by: Claude Code
|
||
 Abdul WahabandGitHub
|
ca121aa35f |
Fix: file-scoped wildcard ignores suppress non-value-bearing rules (#296) (#309)
A file-scoped wildcard ignore (add-value <rule> "*" --file <glob>) silently no-op'd for rules with no extractable value, such as side-tab. isIgnoredFindingValue bailed on an empty value before the wildcard/file-scope branch could run. Require a value only on the specific-value path; let the scoped wildcard match on rule + file. Mirrored in skill/scripts/hook-lib.mjs for CLI/hook parity. |
||
|
Paul BakausandGitHub
|
51d01e3a5f |
[codex] Add design-aware detector rules (#252)
* Add design-aware detector rules * Fix design-aware detector noise * Unify CLI and hook detector ignores * Fix remaining design-system review findings * Add detector ignore CLI * Fix design detector review findings * Fix design color source false positives * Fix core test suite registration * Add design-aware detector docs * Fix font priority design-system parsing * Fix color ignore value matching |
||
|
8cf2be110d |
feat(cli): interactive hook consent + unified .impeccable/config.json (#245)
* feat(cli): interactive hook consent + unified .impeccable/config.json Make the design-hook install a conscious choice and unify scattered config into one file. Interactive consent - On an interactive `skills install`/`update`, the CLI explains what the hook does and offers to install it (default yes), then records the per-developer decision in the gitignored `.impeccable/config.local.json`, so it never re-asks. A recorded decision or an already-installed hook short-circuits; `-y`/non-TTY keeps the historical install-by-default behavior; `--no-hooks` is a one-off skip that records nothing. The trigger keys on "is the hook installed?" + "is there a recorded decision?", not a brittle version check. Unified config - `.impeccable/config.json` (shared) and `.impeccable/config.local.json` (gitignored) now hold all Impeccable settings: hook settings under a `hook` key, plus top-level `updateCheck`. `/impeccable hooks` writes the `hook` subtree, preserving siblings. The hook runtime reads `hook.quiet` and `hook.auditLog`; context boot reads `updateCheck`. The legacy `IMPECCABLE_HOOK_DISABLED|QUIET|LOG` and `IMPECCABLE_NO_UPDATE_CHECK` env vars still work and override config; docs now lead with config and treat env vars as a legacy note. - No backward compat for the pre-unification `hook.json`/`hook.local.json` (the hook shipped an hour ago; nothing in the wild uses it). This repo's own hook config is migrated to `.impeccable/config.json`. The CLI and skill scripts are separate trees, so a small CLI-side config module (cli/lib/impeccable-config.mjs) duplicates the config-path and .git/info/exclude handling; comments flag the duplication. Tests: new cli config unit test; skills-cli consent tests (declined skips, accepted installs, --no-hooks records nothing); hook.test.mjs back-compat removed and quiet/auditLog-from-config + gitexclude coverage added. Full suite green. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(hooks): preserve sibling config fields + resolve audit log from event cwd (Bugbot) Two Bugbot findings: - High: `/impeccable hooks` edits replaced the whole `hook` object with the merge-helper output, dropping fields those helpers don't manage — so an `ignore-value --local` could wipe the recorded install consent and make the CLI re-prompt. writeConfig now merges over the existing hook object, keeping consent/quiet/auditLog. - Medium: config-based audit logging resolved hook.auditLog from process.cwd(), which can differ from the hook event's project root (and Cursor's pre-edit hook passed no cwd). The hook now stamps the resolved project root on the audit entry, and writeAuditLog reads config from entry.cwd when present. Tests: a /impeccable hooks edit preserves consent + quiet; writeAuditLog resolves config auditLog from entry.cwd, not the fallback cwd. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(hooks): resolve a relative auditLog path against the project root (Bugbot) A relative hook.auditLog was read from the project root but written relative to the hook process cwd, so when those differ the log went to the wrong place. writeAuditLog now resolves a relative target (from env or config) against the same project root it reads config from. Absolute and ~/ paths are unchanged. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * Fix hook consent recovery and smoke config * Fix hook consent explainer for Cursor * Fix empty hook target consent --------- Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |