Files
magnus919_agent-skills/electronics/templates/assembly-acceptance.md
T
Magnus HedemarkandGitHub 6db11ea58a feat(electronics): add design and bench methodology (#511)
* feat(electronics): add design and bench methodology

* fix(electronics): retain compact diagnostic evidence

* test(electronics): accept equivalent loading diagnostics
2026-09-14 18:32:32 -04:00

1.0 KiB

Assembly acceptance

Assembly/BOM/schematic/layout revisions:

Operator/date:

Physical and unpowered

  • Orientation, bridges, pads, connectors, strain relief inspected
  • Intended continuity checked with power removed
  • Rail-to-rail and rail-to-signal shorts excluded
  • Optional pull-ups, straps, and protection parts match the record

Controlled power and behavior

Current limit and source:

Measured rails/startup/steady current/temperature:

Reset and idle-state result:

Identity-level bus result and raw capture:

Load/input behavior and tolerances:

Reset/power-cycle repetitions:

Recovery path tested:

Open risks, evidence links, and sign-off:

Evidence separation

Visual inspection proves:

Unpowered electrical test proves:

Powered functional test proves:

Not established by these tests:

Test Setup/revision Expected Observed Pass/block
first power
identity/readback
load behavior
reset/power-cycle