Files
magnus919_agent-skills/electronics/templates/assembly-acceptance.md
T
Magnus HedemarkandGitHub 6db11ea58a feat(electronics): add design and bench methodology (#511)
* feat(electronics): add design and bench methodology

* fix(electronics): retain compact diagnostic evidence

* test(electronics): accept equivalent loading diagnostics
2026-09-14 18:32:32 -04:00

52 lines
1.0 KiB
Markdown

# Assembly acceptance
Assembly/BOM/schematic/layout revisions:
Operator/date:
## Physical and unpowered
- [ ] Orientation, bridges, pads, connectors, strain relief inspected
- [ ] Intended continuity checked with power removed
- [ ] Rail-to-rail and rail-to-signal shorts excluded
- [ ] Optional pull-ups, straps, and protection parts match the record
## Controlled power and behavior
Current limit and source:
Measured rails/startup/steady current/temperature:
Reset and idle-state result:
Identity-level bus result and raw capture:
Load/input behavior and tolerances:
Reset/power-cycle repetitions:
Recovery path tested:
Open risks, evidence links, and sign-off:
## Evidence separation
Visual inspection proves:
Unpowered electrical test proves:
Powered functional test proves:
Not established by these tests:
| Test | Setup/revision | Expected | Observed | Pass/block |
|---|---|---|---|---|
| first power | | | | |
| identity/readback | | | | |
| load behavior | | | | |
| reset/power-cycle | | | | |