mirror of
https://github.com/pbakaus/impeccable.git
synced 2026-09-12 22:26:38 +03:00
Paul BakausandGitHub
331540ddec
* Scope a single rule to a file with ignore-value "*" --file
`ignore-file <glob>` was the only file-scoped escape the hook offered, and
it is far blunter than most findings justify: it silences every rule for
that path forever, including rules not written yet. A real UI surface with
one noisy rule had no proportionate option.
Add a file scope to `ignore-value`, so one rule can be turned off in
matching files while staying active everywhere else:
hooks ignore-value design-system-font-size "*" --file "src/widget.js"
- Refuse a bare `"*"` with no `--file`. Suppressing a rule project-wide is
`ignore-rule`'s job, and the error says so.
- Reject unknown `--flags` instead of folding them into the value.
`ignore-value overused-font Inter --shard` stored the value
"inter --shard", matched no finding, and reported success.
- Key dedup on the file scope too. The same rule/value legitimately
appears more than once with different scopes; the old rule+value key
silently overwrote the earlier entry.
- Keep normalizer key order (rule, value, files, createdAt, reason) in
step across both copies. Normalizing runs on every write, so emitting a
different order than what is on disk rewrites untouched entries.
- Lead with the narrow form in the hook's directive footer and hooks.md;
`ignore-file` is now documented as the whole-file-out-of-scope case.
Dogfoods it on skill/scripts/live-browser.js, where all 32 findings are
design-system-font-size: the overlay is injected over arbitrary host pages
and builds a self-contained UI, so DESIGN.md's ramp does not describe it.
The other rules stay live for that file.
Assisted-by: Claude Code
* Show the file scope in hooks status, and stop the wildcard error misdirecting
Two findings from Cursor.
status formatted every ignore value as rule=value and dropped files. Now
that the primary hooks path writes file-scoped `"*"` entries, that rendered
`design-system-font-size=*` — which reads as exactly the project-wide
wildcard this command refuses, the opposite of what is on disk. Print the
scope, matching the `rule=value [files]` shape `impeccable ignores list`
already uses. This repo's own config already carries several scoped
wildcards written through the CLI path, so status has been under-reporting
them.
The bare-wildcard refusal always pointed at `ignore-rule <rule>`. For
overused-font that command refuses on its own without --all-values, so the
guidance handed the user a second error. Name the flag for that rule.
Assisted-by: Claude Code
* Refuse an empty --file glob, and store multi-file scopes in canonical order
Two Copilot findings, both the silent-no-op class this PR exists to remove.
An empty glob was dropped by filter(Boolean). So
`ignore-value overused-font Inter --file=` reported "Added
overused-font=inter" and wrote an entry with no files: the user asked to
scope a rule to one file and silently got the project-wide suppression
instead — broader than what they asked for, reported as success. Refuse an
empty or whitespace glob on every form (--file, --file=, --files, --files=)
in both the hook-admin and CLI paths.
Multi-file scopes were deduped but not ordered, and the dedup key compares
the files array, so `--file b.css --file a.css` stored a second entry
distinct from `--file a.css --file b.css`. Sort at parse so storage is
canonical, and sort inside the key so entries already on disk in another
order still compare equal.
Assisted-by: Claude Code
* Sort files in every dedup key, not just two of the four
My previous commit sorted the file scope at parse time and inside
ignoreValueFilesKey, and stopped there. Cursor pointed out ignoreValueKey
(CLI) and ignoreValueEntryKey (hook-admin) still joined `files` in stored
order, so add/remove dedup missed any on-disk scope whose glob order
differed from the sorted argv form: a re-add duplicated the entry and a
remove silently failed.
Four functions hash `files`; I had fixed two. All four sort now. The
remaining `files.join(', ')` call sites are display, not keys.
Verified against a config seeded in non-sorted order, as an older client
would have written it: the re-add updates the existing entry rather than
duplicating it, and remove-value finds it. Test covers that shape.
Assisted-by: Claude Code
* Refuse a following flag as a --file glob
Cursor again, same class as the last two. requireGlob checked non-empty but
not whether the argv it consumed was itself a flag, so
`ignore-value design-system-font-size "*" --file --reason "why"` took
`--reason` as the scope, left "why" to fold into the value, stored
value="* why" files=["--reason"], and reported success. Garbage, announced
as done.
Refuse a glob starting with `--`, in both the hook-admin and CLI paths.
Assisted-by: Claude Code
102 lines
10 KiB
Markdown
102 lines
10 KiB
Markdown
# /impeccable hooks
|
|
|
|
Manage the **design detector hook** for the current project.
|
|
|
|
The hook runs the impeccable design detector on direct file edits to design-relevant files (`.tsx`, `.jsx`, `.html`, `.vue`, `.svelte`, `.astro`, `.css`, `.scss`, `.sass`, `.less`, `.ts`, `.js`). Claude Code, Codex, and GitHub Copilot use a post-tool-use hook and push a short system reminder into the agent's context after the edit; findings get a correction prompt, pending issues get a re-nudge, and clean UI-ish files get a short ack unless quiet mode is on (`hook.quiet` in config). Plain `.ts` and `.js` files are still scanned, but stay quiet unless the detector finds something. Cursor uses `preToolUse` to block bad proposed writes before they land and stays silent when it allows a clean write.
|
|
|
|
This command toggles the hook **per project** by editing `.impeccable/config.json` (the unified Impeccable config; hook runtime settings live under its `hook` key, and shared detector ignores live under `detector`). Per-developer overrides, including the install consent decision (`hook.consent`) the CLI records, live in the gitignored `.impeccable/config.local.json`. Set `hook.enabled: false` to turn the hook off, `hook.quiet: true` to silence the clean/pending acks, or `hook.auditLog` to a file path for an NDJSON log. The legacy `IMPECCABLE_HOOK_DISABLED`, `IMPECCABLE_HOOK_QUIET`, and `IMPECCABLE_HOOK_LOG` env vars are still honored and override these config values when set.
|
|
|
|
Declare server-side template extensions under **`detector.extensions`** when the project uses Blade, Twig, ERB, or Handlebars files; the hook skips them otherwise because they sit outside the built-in extension list. One entry per extension, `{ "ext": ".blade.php", "engine": "html" }`. `engine` picks the analyzer (`html` for markup templates, `text` for JS/TS/CSS-like files) and defaults to `html`. Match against the end of the filename, so double extensions like `.blade.php` and `.html.erb` work. Config only adds extensions; the built-in list always applies.
|
|
|
|
Manual `npx impeccable detect` scans use the same project filter config by default: `detector.ignoreRules`, `detector.ignoreFiles`, `detector.ignoreValues`, and `detector.designSystem.enabled`. `hook.enabled` only controls automatic hook execution, not manual CLI scans. Use `npx impeccable detect --no-config ...` for a raw detector run that ignores project config/context. Use `npx impeccable ignores ...` for direct CLI CRUD on the same detector ignores.
|
|
|
|
Supported harnesses: Claude Code (`.claude/settings.local.json` in the project, which is gitignored so the hook stays machine-local; a hook you move into the shared `settings.json` is honored in place too), Codex (`.codex/hooks.json` in the project), Cursor (`.cursor/hooks.json` in the project), and GitHub Copilot (`.github/hooks/impeccable.json` in the project, a team-shared committed file that both the Copilot CLI and the cloud agent read). For the Copilot CLI, repo-level hooks fire once `.github/hooks/impeccable.json` is committed to the repository's default branch.
|
|
|
|
On **Cursor**, `preToolUse` checks proposed Write/Edit/Shell write content and denies only when the real detector finds an issue. The denial message is visible to the agent as the tool error, so the agent can reconsider before the bad write lands.
|
|
|
|
## Routing
|
|
|
|
The first argument is the action. Defaults to `status`.
|
|
|
|
| Action | What it does |
|
|
|---|---|
|
|
| `status` | Print current state, shared/local config paths, ignored rules / files / values, env override. |
|
|
| `on` | Set `enabled: true` in `.impeccable/config.json`, record local hook consent as accepted, and install/repair provider hook manifests when the skill is installed. |
|
|
| `off` | Set `enabled: false` in `.impeccable/config.json`. |
|
|
| `ignore-rule <id>` | Append `<id>` to `detector.ignoreRules`; for `overused-font`, requires `--all-values`. Suppresses the rule across the whole project. |
|
|
| `ignore-file <glob>` | Append `<glob>` to `detector.ignoreFiles`. Suppresses **every** rule for matching files. |
|
|
| `ignore-value <id> <value> [--shared] [--reason "..."]` | Append a rule/value suppression to shared `.impeccable/config.json`. |
|
|
| `ignore-value <id> <value> --local [--reason "..."]` | Append a private rule/value suppression to `.impeccable/config.local.json`. |
|
|
| `ignore-value <id> "*" --file <glob> [--file <glob>...]` | Turn one rule off in matching files only, leaving it active everywhere else. Repeat `--file`, or use `--file=<glob>` / `--files=<glob>`. A bare `"*"` with no `--file` is refused: use `ignore-rule <id>` if you really mean project-wide. |
|
|
| `reset` | Delete the project config, dedup cache, and Cursor pending queue. |
|
|
|
|
## Flow
|
|
|
|
1. Resolve the action from the user's argument. If no action was given, default to `status`.
|
|
2. Invoke the admin script and pass the user's output through verbatim:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs <action> [args...]
|
|
```
|
|
|
|
3. If `<action>` is `off`, follow up with a one-line note: "Done. New edits will not trigger the design hook in this project until you run `{{command_prefix}}impeccable hooks on`."
|
|
4. If `<action>` is `on`, follow up with: "Done. The design hook will fire after the next Edit/Write/MultiEdit on a UI file."
|
|
5. If `<action>` is `ignore-value`, `ignore-file`, or `ignore-rule`, just print the script output. The default scope is shared `.impeccable/config.json`; add `--local` only when the user explicitly asks for a private exception.
|
|
6. If `<action>` is `status`, just print the script output. Do not add commentary unless the user asked a follow-up question.
|
|
|
|
## Intentional findings
|
|
|
|
The hook itself never writes ignore config. Persist an exception only after the user explicitly confirms the flagged issue is intentional, and always go through `hook-admin.mjs`.
|
|
|
|
Prefer the narrowest exception:
|
|
|
|
- If the finding line shows an exact `ignore-value` command, run that command. This writes shared `.impeccable/config.json` by default.
|
|
- For value-specific findings such as `overused-font` and `bounce-easing`, use `ignore-value` when the user confirms the specific value. Do not use `ignore-rule overused-font` for a specific font.
|
|
- If the finding has no value-specific command, such as `side-tab`, scope that one rule to the file: `ignore-value <id> "*" --file <path>`. Run `npx impeccable detect <path>` first to see what actually fires there.
|
|
- Reach for `ignore-file <path>` only when the whole file is out of scope for design review: a fixture, a generated artifact, a deliberate slop demo. It silences every rule for that file permanently, including rules that have not been written yet. A real UI surface with one noisy rule wants the file-scoped value ignore above.
|
|
- Use `ignore-rule <id>` only when the user asks to suppress that whole rule across the project. For broad overused-font suppression, use `ignore-rule overused-font --all-values` only when the user asks to ignore overused fonts generally.
|
|
- Prefer config ignores (the commands above) by default; they keep suppressions in one reviewable place. Reach for an inline comment only when the waiver must travel with a single file that leaves the repo (a generated/exported standalone document, an emailed HTML file). The supported marker is `impeccable-disable <rule>` (whole file) or `impeccable-disable-line` / `impeccable-disable-next-line` (one line), in any comment syntax, with an optional reason after `:` or `--`. The detector honors it by default; `--no-inline-ignores` or `--no-config` bypasses it.
|
|
|
|
Example value-specific exception:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs ignore-value overused-font Inter --shared --reason "User confirmed Inter is intentional"
|
|
```
|
|
|
|
Example intentional motion exception:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs ignore-value bounce-easing bounce-ball --shared --reason "User confirmed ball bounce animation is intentional"
|
|
```
|
|
|
|
Example whole-rule font exception:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs ignore-rule overused-font --all-values --reason "User asked to ignore overused fonts generally"
|
|
```
|
|
|
|
Example one-rule-in-one-file exception, for a file that is still worth reviewing
|
|
for everything else:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs ignore-value design-system-font-size "*" --file "src/overlay/widget.js" --reason "Injected widget builds its own type scale; DESIGN.md's ramp describes the site"
|
|
```
|
|
|
|
Example whole-file exception, for a file that is out of scope entirely:
|
|
|
|
```bash
|
|
node {{scripts_path}}/hook-admin.mjs ignore-file "src/legacy/Card.tsx"
|
|
```
|
|
|
|
## Constraints
|
|
|
|
- Never modify `.impeccable/config.json` or `.impeccable/config.local.json` by hand from this command. Always go through `hook-admin.mjs` so writes stay validated and the file shape stays consistent. One exception: `detector.extensions` has no admin action, so when the user asks to cover a template stack, edit that one field in `.impeccable/config.json` directly and leave the rest of the file untouched.
|
|
- Do not edit the hook scripts themselves (`hook.mjs`, `hook-lib.mjs`, `hook-before-edit.mjs`) from this flow. Those are skill plumbing.
|
|
- Cursor can block a proposed write when the detector finds a real issue. Claude Code, Codex, and GitHub Copilot do not block the edit; they emit a post-edit reminder instead. Disabling stops both blocking and reminders.
|
|
- The hook is bundled with the Impeccable skill and installed through project-local manifests: `.claude/settings.local.json`, `.codex/hooks.json`, `.cursor/hooks.json`, and `.github/hooks/impeccable.json`. On Codex, the user must approve the hook via `/hooks` the first time. On Cursor, confirm hooks are enabled under Settings -> Hooks. On GitHub Copilot, the CLI loads `.github/hooks/impeccable.json` once it is committed to the repository's default branch, and the cloud agent reads it from the repo directly.
|
|
|
|
## Failure modes
|
|
|
|
- If `.impeccable/config.json` or `.impeccable/config.local.json` is unreadable or malformed, the hook ignores that file and uses the remaining valid config/defaults. `hook-admin.mjs status` will show malformed files as ignored.
|
|
- If the user asks to "disable the hook" globally, lead with `{{command_prefix}}impeccable hooks off` (persistent for this project; writes `hook.enabled: false` to config). The legacy `IMPECCABLE_HOOK_DISABLED=1` env var also works as a one-shot override that follows the shell.
|